Residential building № 4 on the Krasninskoe highway in Smolensk (Russia)
Architects – A. Osenenko, V. Semenenko, J. Morozov, M. Fadeeva
Design engineer – I. Azarenko, N. Tomilov
Engineers – T. Kononovich, A. Atrashkevich, V. Zavalnaya, S. Grebeshkova, A. Semenenko
Project year – 2017
Client – JSC "Your Home"
Total area of apartments – 21017 m2
The Number of apartments – 362
The bulk of building constractions – 101931 m3
Location – Russia, Smolensk, Krasninskoe highway

The plot of 1.38 hectares is located on the territory of the residential quarter of the West II residential microdistrict (Krasninskoe highway, Smolensk) "Alexandrovsky Quarter".
10-storey "P" -shaped form in terms of the residential house has eight sections.
Comfort category -II. The first floor is residential. All sections have a technical underground for the wiring of utility networks. In one of the sections of the first floor there is a basement floor, in which the electrical board, the water inlet and the water meter are designed.
Access to the house is carried out on intra-quarter passages along the outer perimeter of the house. Thus, the yard space of the house is freed from transport and is used for organizing children's and sports grounds, landscaping. From the outside of the house along the driveways there are guest parking spaces and parking for temporary storage of cars of the residents of the house. Along the facades of the yard part of the house there is a possibility for passing of fire engines and other technical cars. Foot paths are reinforced with coating. All sections have through passageways, providing access to thoroughfares and parking zones on one side and to the courtyard with recreation areas on the other.

The dwelling house has a warm attic in which ventilation from the apartments is removed for further disposal through the prefabricated shafts and in which the machine rooms of the elevators are located. Six sections have 4 apartments per floor, and two corner sections - 6-7 apartments per floor.
Bearing structures of the building, stairways, elevator shafts made of bricks.
External wall enveloping structures are multilayered:
- inner layer - brick, thickness 380 mm, heat insulation according to heat engineering calculation mineral wool plates, outer layer of facing brick.
Made on
Tilda